Tru-Blu Oil is proud to announce the launch of the first products from our “new generation” bio-degradable ENVIRO lubricants. Traditionally Zinc free and bio lubes performance characteristics have not been as good as anti wear based lubes. Tru-Blu’s “new generation” Zinc free fluids changes all that. These lubes are better in many respects to the traditional Anti-Wear mineral based lubes.

The first products in the range to be available are a line of zinc free hydraulic fluids. These fluids use plant derived base stocks in combination with top tier additives from Europe. This plant derived base stock has improved lubricity over the traditional mineral based products.
The fluids include a comprehensive blend anti-wear, anti- foam and anti-oxidation components to protect the users system and extend fluid life. Particularly for traditional Zinc free usage this is a major improvement. The use of bio-degradable fluids is increasing due to environmental concerns and now users can have one that outperforms the mineral based products making this a very attractive alternative.
Zinc free fluids are normally not AW but these improved AW fluids can be used were non AW fluids were used in the past (silver and bronze bushes and shells) thus giving better protection longer life and reducing inventory to one fluid.  
The fluids also have a very high viscosity index; above 200 for the ISO VG46 and ISO VG 68 grades, this allows for more predictable behavior over a given temperature range, This very high index allows users to reduce fade thus maintaining /increasing machine performance particularly when working in high ambient temperatures, where normal fluids may reduce the controls sensitivity and slow the hydraulics response thereby increasing the time to complete a given task.

The savings from this alone can well justify the use of this fluid.
Now there is no reason not to go green.

Contact Tru-Blu Oil for more information and to order our new ENVIRO lubricants

Stroker Marine OB40

A versatile, high performance engine oil, specially formulated for marine outboards requiring NMMA TCW3® grade oil is available from Tru-Blu.

Stroker Marine OB40 is an alternative to the expensive brand names available in the market, without the compromise on quality. Stroker Marine OB40 is formulated (NMMA TCW3® grade) to protect against ring sticking and cylinder wall scuffing. OB40 will help minimise spark plug fouling, pre-ignition and exhaust deposits, whilst protecting the engine parts against rust and corrosion.

Other benefits gained from using Stroker Marine OB40 include,

• Dramatic reduction in engine deposits and cleaner spark plugs giving longer engine life, better power, improved spark plug performance and less chance of engine pre-ignition.

• Improved lubrication for better performance with engine power levels retained for longer.
• Reduced ring sticking which gives better compression and easier starting.
• Cleaner engines due to the reduction in piston varnish.
• Protection of the engine parts against rust and corrosion.
• Possibility of engine malfunctions due to moisture, are lessened.

Recommended for use in 2 stroke engines, Stroker Marine OB40 exceeds the current requirements of Mercury, Tohatsu, Evinrude/Johnson, Suzuki, Yamaha and Mariner.

For more information or a copy of the MSDS or PDS, contact Tru-Blu Oil.

Available in: 5 Lt, 20 Lt, 205 Lt

Registration: NMMA TC-W3 RL-00417J 2009

Tru-Blu Oil Australia has recently acquired the OilTech Australia Pty Ltd product range.  

Over the past 20 years OilTech had developed a range of synthetic lubricants, in particular fire resistant hydraulic fluids that enables the customer to reduce the risk of fire hazards, chemical and environmental exposure and allows them to work safer and eliminate poor lubricant performance.

OilTech had a comprehensive knowledge base on synthetic lubricants and functional fluids.

Along with the acquisition of the OilTech product range, Mike Pelling OilTech's Account Manager has moved to Tru-Blu Oil and will be providing sales and technical advise to customers of Tru-Blu Oil across the Tru-Blu Oil range of products and OilTech.

Information on OilTech products is available on our website, and if you would like more information on any OilTech or Tru-Blu Oil products or to place an order please contact us on 9720 4400.

Samples are now available from Tru Blu Oil. Currently, there are six products available in the 50ml sample size. For your free sample, simply download a copy of the Sample Request Form and return it to us.

 The samples include: