Duro Ultra Hydraulic Oil ISO 68
DURO ULTRA HYDRAULIC OIL ISO 68 is a premium anti-wear hydraulic oil with rust, oxidation and foam inhibitors and zinc based anti-wear additives. It promotes excellent cleanliness, extended fluid life, demulsibility and filtering ability even when water contaminated.
DURO ULTRA HYDRAULIC OIL ISO 68 has an exceptionally long life due to the use of premium hydrotreated
mineral base stocks. These ultra-clear oils provide an improvement in hydraulic fluid life of up to 2x
when compared to conventional mineral oil products. Excellent air release properties minimise
compressibility and prevent noisy and erratic operation of equipment.
DURO ULTRA HYDRAULIC OIL ISO 68 is for use in hydraulic systems calling for zinc-based anti-wear oils,
particularly systems with vane pumps operating at pump pressures above 1000 psi and speeds above 1200
rpm. The exceptional performance of the anti-wear additives in the important areas of high-pressure/highspeed
pump protection, anti-rust and corrosion, thermal and oxidative stability and filterability provides a
cost-effective product resulting in reduced equipment downtime. It can also be used in other systems where
wear rates are high using conventional oils.
DURO ULTRA HYDRAULIC OIL ISO 68 is compatible with other hydraulic oils that contain a zinc based anti-wear system.
DURO ULTRA HYDRAULIC OIL ISO 68 meets or exceeds the requirements of:
- Denison HF-0,
- DIN 51524 Part 2 (HLD) & Part 3 (HVLP)
- Eaton Vickers M-2950-s (35VQ25) and I-286-S
- CINCINNATI Machine P-68, P-69 and P-70
- Wet phase (II) of the Denison T6C-020 vane pump
- AFNOR NF E 48-603 (HM & HV)
- AFNOR NF E 48-690, NF E 48-691 Filterability
205 litre drum, 20 litre pail, 5 litre pack.